Skip to content Original price was: $1,995.00.$1,600.00Current price is: $1,600.00.
Advanced aerosol delivery for serious respiratory care.
The AirICU Max+ is a professional-grade medical mesh nebulizer designed for advanced breathing support setups, including supported adult breathing circuits, positive-pressure breathing assistance, and clinical respiratory care environments.
Unlike a basic handheld nebulizer, the AirICU Max+ can deliver aerosol therapy in continuous mode or breath-synchronized mode when used with the airflow sensor.
Most home nebulizers are built for simple mouthpiece or mask treatments.
Use vibrating mesh technology
Breath-synchonized mode
Continuous nebulization mode
Limited
Adjustable output levels
3 Levels
Designed for advanced respiratory setups
Can connect with supported 22mm adult breathing circuits
Louder
Quiet operation
<30 dB
Built-on display
Battery powered
Looking for something simpler?
Our TruNeb™ Portable Mesh Nebulizer may be a better fit for everyday treatments.
A standard nebulizer creates mist, but it is not designed to connect into advanced breathing setups. The AirICU Max+ is designed for adult respiratory care where medication mist may need to be delivered through a supported breathing circuit or positive-pressure breathing assistance setup.
The system uses medical mesh technology to turn liquid medication into a fine aerosol. It also includes adjustable output settings, a display screen, and breath-synchronized delivery when used with the airflow sensor.
The AirICU Max+ helps bridge the gap between simple home nebulizers and more advanced respiratory support equipment.
With the included airflow sensor, the AirICU Max+ can operate in breath mode..
That means the system is designed to deliver aerosol during inhalation and pause during exhalation. This helps reduce wasted medication mist compared to continuous mist delivery.
Plain English Version: Instead of misting nonstop, breath mode helps the device work with the patient’s breathing pattern.
The AirICU Max+ also includes continuous mode, which delivers aerosol steadily during the treatment. This can be useful when breath-synchronized delivery is not needed or when the airflow sensor is not being used.
Add medication to the cup.
Connect the medication cup and cable.
Choose your output level and treatment time.
Start the nebulizer.
The device supports 15-minute, 30-minute, or continuous operation settings based on the setup and care plan.
The AirICU Max+ includes 3 nebulization levels, giving users more control than a basic nebulizer.
Lower output 0.15–0.60 mL/min Gentler aerosol delivery
Standard output 0.25–0.80 mL/min Balanced aerosol delivery
Higher output 0.35–0.90 mL/min Stronger aerosol output
Simple Version: Use a lower setting for gentler delivery.
Use a higher setting when stronger aerosol output is needed.
The AirICU Max+ uses advanced mesh nebulization technology. Instead of using a loud compressor, the system uses a vibrating mesh to create aerosol particles from liquid medication. The manual lists an aerosol particle size of MMAD <5 μm, which is the type of fine mist commonly expected from medical nebulization equipment.
Quiet operation under 30 dB
Fine aerosol
mist
No large compressor required
Compact
main unit
Designed for consistent medication delivery
The AirICU Max+ is best for people or organizations who need more than a basic handheld nebulizer.
The manual specifically states this device is intended for adults and for physician-prescribed nebulized solutions. It is not for oils, herbal extracts, or suspended-particle liquids.
The AirICU Max+ main unit is small, lightweight, and easy to mount near the treatment setup. The main unit weighs approximately 71g and includes a built-in rechargeable lithium battery. It can also operate while connected to the power adapter.
Handheld treatments
Not the main purpose
Advanced breathing circuit use
Breath-synchronized mode
Adjustable output levels
Airflow sensor support
3 output levels
10 mL medication cup
Built-in screen
Professional accessories
Better fit for advanced respiratory care
Looking for something simpler?
Our TruNeb™ Portable Mesh Nebulizer may be a better fit for everyday treatments. The AirICU Max+ is for advanced aerosol delivery when the setup is more serious, more technical, or connected to supported adult respiratory equipment.
Your AirICU Max+ kit includes the professional components needed for setup.
Note: Final kit contents should match the exact configuration TruNeb ships.
Some AirICU parts are sold separately depending on the package configuration.
The AirICU Max+ should be set up according to the included instructions.
Basic setup overview:
Add prescribed nebulized solution to the medication cup.
Connect the medication cup to the T-piece or supported breathing setup.
Connect the cable to the main unit and medication cup.
Choose continuous mode or breath mode.
Select the nebulization level and treatment time.
Start the nebulizer.
After treatment, discard remaining liquid and clean as directed.
Important: Always follow the included AirICU Max+ instructions for setup, cleaning, and operation.
Medical Mesh Nebulizer
AirICU Max+ ST
10 mL max
Continuous Mode / Breath Mode
L1 / L2 / L3
0.15–0.90 mL/min depending on level
MMAD <5 μm
<30 dB
3.7V / 1000 mAh rechargeable lithium battery
Type-C charging
About 3 hours to full charge
15 minutes / 30 minutes
Approx. 71g
86 mm x 54 mm x 18 mm
22 mm adult breathing circuits
Adults
Wye or humidifier position
AirICU is groundbreaking and more intelligible in its full-scenario support of nebulization solutions for critical care!
– Dr. Fernando. PICU based experts, Respiratory Physician
The AirICU Max+ is an advanced medical mesh nebulizer system designed for adult aerosol therapy. It can be used in continuous mode or breath-synchronized mode when connected with the airflow sensor.
No. A regular portable nebulizer is usually made for simple handheld treatments with a mouthpiece or mask.
The AirICU Max+ is a more advanced system designed for supported adult respiratory setups and breathing circuits.
“ST” is part of the AirICU Max+ ST model name. The important thing to know is that this model supports both continuous nebulization and breath-synchronized nebulization when used with the airflow sensor.
Breath-synchronized nebulization means the device can deliver aerosol during inhalation and pause during exhalation when used with the airflow sensor. This helps reduce wasted aerosol.
Yes. The AirICU Max+ can be used in continuous mode without the airflow sensor. Breath mode requires the airflow sensor.
This product is best for adult respiratory care users, caregivers, clinics, facilities, and people using supported breathing equipment who need a more advanced nebulizer system than a basic portable nebulizer.
No. The manual lists the suitable population as adults. I would not market this for children or pediatric use.
No. Do not use oils, herbal extracts, or liquids with suspended particles. Use only appropriate nebulized solutions as directed.
Yes, the TruNeb kit should include the AirICU Max+ main unit and key setup accessories. Final contents should be listed in the “What’s in the Box” section above.
The manual lists the medication cup/accessory life as up to 28 days for intermittent use or 7 days for continuous use, depending on the use case. Replacement accessories should be available separately.
Yes. The AirICU Max+ has a listed noise level under 30 dB, making it much quieter than many compressor-style nebulizers.
Yes. The manual states the device can operate while charging.
This product is a professional respiratory device. Use your normal TruNeb policy if you want, but I would make this stricter than the $147 portable nebulizer because of the price and accessories.
Suggested copy:
Due to the medical nature of this product, opened or used units may not be eligible for return unless defective. If your product arrives damaged or does not work properly, contact TruNeb support and we will make it right.
The AirICU Max+ gives you professional-grade aerosol delivery in a compact, quiet, and advanced mesh nebulizer system.
Original price was: $1,995.00.$1,600.00Current price is: $1,600.00.
Ships from FL within 24 hours!
